United Kingdom

Need some help?

Give us a call:

Sales hotline:       0370 850 1401

Short-term hire:  0370 850 1403

Hours: Mon - Fri: 9 a.m. - 5 p.m.

Send us an e-mail, we will get back to you

within 24 hours.

 

All prices excl VAT and shipping cost.

We only ship within the UK.

Your cart is empty.
BT Staxio powered pallet stucker

Mast Guide

This guide explains the differences between the masts available for stacker trucks and the applications they are designed for.

What type of mast do you need for your truck?

 

With a wide range of mast models available how do you make the right choice? Before choosing a mast it’s best to take height restrictions into consideration:

1. How high do you need to lift?

Locate and measure your highest shelf to understand lift requirements and then add another 150-200 mm to your measurement. The extra space allows a truck operator additional clearance to lift above the rack and avoid dragging the product as it’s loaded or unloaded.

2. How low must your lowered or collapsed mast be?

Some applications call for entering and exiting doorways. Perform a walk-through of your building and measure doorway heights to learn your lowered height requirement. If your application also requires operation on lorries, you need to take the lorry measurements in to consideration too.

3. If you load product onto lorries, do you double-stack?

When working in a confined space the feature called free lift should be considered. The free lift function enables the forks to be lifted to a certain height with the mast at collapsed height.

One of the many ways to keep productivity high in your operation is having the right truck suited to your specific application and environment. The type of mast for your truck can already make a difference. Here are the all models you can choose from:

Mono Mast

  • This is a centrally positioned mast.
  • Suitable for low lift heights where the operator often works close to the truck so you can use it as a work table.
  • It is easy to move around the mast with a very small risk of injuries.

Only available on the BT Staxio 0.8 tonne and BT Staxio 1 tonne models

Single-Stage Mast - Simplex

  • This one section mast uses a single frame and has limited lift height.
  • Maximum mast height remains the same, even during lifting. 
  • A simple solution that suits applications not requiring high lift heights.

Available on BT Staxio 1 tonne - 1.2 tonne

Two-Stage Mast - Duplex Tele

  • This is mast, with two sections and a centrally located cylinder, is a common mast type for many high-capacity forklifts.
  • Has a free-lift range of 76 mm so it is possible to transport goods horizontally without raising the mast and increasing its minimum height.

  • Suitable for loading and unloading trucks and in low-level applications.

Available on BT Staxio 1 tonne -2 tonne

Two-Stage Mast with full view option

Duplex Tele Panoramic View

  • This mast uses two mast sections with two cylinders positioned along the sides. This optimises operator visibility, while rendering fork positioning safe and easy. 
  • Has a free-lift range of 76 mm which enables horizontal transport of goods without raising the mast and increasing its minimum height. It's especially useful if the site has low ceiling clearance or doorways.

Available on BT Staxio 1 tonne - 2 tonne

Two-Stage Mast with free lift - Duplex Hi-Lo

  • A two-section mast with maximum free-lift range.
  •  This mast combines high lift heights with a low mast height.

  • Suitable for stacking applications in halls with limited ceiling heights, on covered lorries and places where the truck must pass through doorways with low clearance.

  • Excellent view through this mast.

Available on BT Staxio 1 tonne - 1.4 tonne

Three-Stage Mast with free lift - Triplex Hi-Lo

  • A three-section mast with maximum free-lift used for high lift heights in combination with the demand for a low minimum mast height.
  • Higher lift height gives you a higher free-lift. 
  • Well suited for stacking applications in operation on covered lorries and most commonly used in distribution centers, warehouses and other applications where you lift to higher levels.

Available on BT Staxio 1 tonne - 1.4 tonne

Do you know which powered truck you need?

Use our Shopping Guide that will help you to choose right model from our powered trucks or powered stackers range.  

View Shopping Guide

Why Buy Toyota?

We are proud to be the world's number 1 in producing high-quality materials handling equipment. Find out more benefits to work with us.

Learn more

Toyota Rental Solutions

Toyota Rental Solutions

We offer rental trucks for flexible periods. Whether for days, weeks or months, at short notice or in advance: you can count on us.

Learn more

Need help?

We make it easy for you to get in touch with us. You can email or if you prefer, call us. We are available Monday - Friday, 9 a.m. - 5 p.m.

Contact us

Clear all